坡口銑邊機的三大分類及技術優勢

板材銑邊機是一種焊接輔助設備，利用刀盤的高速銑削原理，在焊接前為鋼板開焊縫坡口。板材銑邊機通過高速旋轉的刀盤對板材邊緣進行銑削，專門用于焊接前的坡口加工（如坡口、直邊、U型等）。

一般，坡口銑邊機的工作原理是利用刀盤的高速旋轉，通過刀具對板材邊緣進行切削，實現高效、高精度的邊緣加工，并可同時加工板材的兩側（例如雙頭設計）。

The plate Edge milling machine is a welding auxiliary equipment that uses the high-speed milling principle of the cutter disc to open the weld groove for the steel plate before welding. The plate Edge milling machine mills the edge of the plate through the high-speed rotating cutter disc, and is specially used for bevel processing before welding (such as bevel, straight edge, U-shaped, etc.).

The working principle of the milling machine is to use the high-speed rotation of the cutter disc to cut the edge of the plate through the tool to achieve high-efficiency and high-precision edge processing, and can process both sides of the plate at the same time (such as double head design).

板材銑邊機的三大分類

板材銑邊機主要用于金屬板材的邊緣加工，形成焊接所需的坡口。其主要類型分為自動行走銑床、大型銑床、數控鋼板板材銑邊機等。

自動行走鋼板銑邊機

該款鋼板銑邊機體積小巧，操作簡便，可移動作業，提高了設備??的靈活性。它利用銑削原理和自動行走功能，可對厚度6-60mm、長度和寬度不限的鋼板進行銑削坡口作業。

大型鋼板銑邊機

大型鋼板銑邊機采用液壓缸將工件壓緊在工作臺上，通過調節銑頭角度和后部的Y、Z軸行程來控制鋼板的坡口角度和坡口深度。該款鋼板銑邊機銑削行程長，主軸銑削力強??，適用于長鋼板的銑削或坡口加工。

數控鋼板銑邊機

該款鋼板銑邊機采用液壓方式固定鋼板。后銑動力主軸具有自動旋轉角度和自動擋料功能?？刂泼姘逯恍栎斎霂讉€(gè)關鍵參數即可自動坡口銑削。

數控鋼板坡口銑邊機的銑削自動化程度高、操作簡便、坡口精度高、生產效率高、安全性高，適用于中短板的自動坡口加工。

技術優勢

高效：?jiǎn)未渭庸に俣瓤蛇_(dá)30米/10分鐘，降低了工人勞動強度；

高精度：一次成型，無需二次清理毛刺，表面光潔度高；

低能耗：與傳統設備相比，能耗更低。

Three major categories of plate Edge milling machine

The  plate Edge milling machine is mainly used for edge processing of metal plates to form the groove required for welding. Its main types are divided into automatic walking milling machines, large milling machines, CNC steel plate milling machines, etc.

?Automatic walking plate Edge milling machine

This type of plate Edge milling machine is a small and easy-to-operate equipment that can be moved for operation, which improves flexibility. It uses the milling principle and automatic walking function to perform milling bevel operations on steel plates with a thickness of 6-60mm and unlimited length and width.

Large plate Edge milling machine

Large plate Edge milling machine uses hydraulic cylinder to press the workpiece on the workbench, and controls the groove angle and groove depth of the steel plate by adjusting the milling head angle and Y and Z axis stroke at the rear. This type of plate Edge milling machine has a long milling stroke and strong spindle milling force, which is suitable for milling or beveling of long plates.

CNC steel plate Edge milling machine

This type of plate Edge milling machine uses hydraulic method to fix the steel plate. The rear milling power spindle has automatic rotation angle and automatic material blocking function. The control panel only needs to enter a few key parameters for automatic beveling and milling.

CNC steel plate Edge milling has a high degree of automation, simple operation, accurate groove accuracy, high production efficiency and safety, and is suitable for automatic beveling of medium and short plates.

Technical advantages

High efficiency: The single processing speed can reach 30 meters/10 minutes, which significantly reduces labor intensity;

High precision: One-time forming, no need to clean burrs twice, and high surface finish;

Low energy consumption: Compared with traditional equipment, it consumes less energy.

結論

各類鋼板坡口銑邊機廣泛應用于鍋爐壓力容器制造行業、船舶制造、電力、石油化工機械、工程機械制造等行業?？蓪?duì)各類中低碳鋼板、不銹鋼板、鋁板進行坡口、直邊、U型坡口等焊前加工。

Conclusion

Various types of plate Edge milling machine are widely used in boiler and pressure vessel manufacturing industries, shipbuilding, electric power, petroleum, chemical machinery, and engineering machinery manufacturing. They can process various types of medium and low carbon steel plates, stainless steel plates, and aluminum plates before welding, such as bevels, straight edges, and U-shaped grooves.